 K&N
Universal Round Straight
Clamp-on Filters
When selecting one of
K&N's universal round straight air filters, you should consider the following
dimensions as they relate to the specification chart:
(F) Mounting Flange Inside Diameter — This is the most critical
dimension and should be very close to the diameter of the application's inlet flange. The
flange will stretch up to 1.5mm for those in-between sizes.
(D) Filter Diameter — This is the outside diameter of the filter.
The top size is listed first, then the base size. Always use the largest size filter that
is practical for the application.
(L) Filter Length — This dimension is the vertical length of the
filter body only, it does not include the length of the flange, nor does it take into
account the taper of the filter media. Always use the longest filter practical, for
maximum filtration.
(FA / FL) Flange Angle and/or Length — If no angle is listed in the
specifications table, the flange is straight. Any angle listed is in degrees and can be
utilised when space is a problem.
Flange Type — The location of the flange in relation to the
O.D. of
the filter is sometimes offset to one edge of the filter for more clearance in an
application.
To place an order make a note of the part number and visit our secure
server:
ORDER HERE
SHIPPING COSTS:
U.K. - £7.50
Europe - £15
Rest of World - £25
Terms & Conditions:
All Items will be charged in pounds sterling.
Prices include VAT and 25% discount
Assuming your order(s) are in stock (with Kinnor or manufacturer) it will be dispatched
as soon as possible, within 2 working days of receiving payment and should be received
within approximately 3 days (UK), 7 days (Europe) or 10 days (rest of World). We will
inform you of any delays by email.
Please
view our terms and conditions here
(Not sure of total cost? Just email us). |
|
